Version History
Here you can find the changelog of nightguard since it was posted on our website on 2021-12-17.
The latest version is 3.9.1 and it was updated on soft112.com on 22 April, 2024.
See below the changes in each version:
version 3.9.1
posted on 2024-01-16
Jan 16, 2024
Version 3.9.1
V3.9.1:
- Fixed a problem with complications updates
- Fixed mmol notifications
- Fixed complications for the Infograph Watch-Face
V3.9.0:
- Xmas update with the longest requested feature: Much better background notifications.
- And not only notifications: Critical Notifications are send now. You can disable this in your notification settings.
- Allowed alarm targets in 5 instead of 10mgdl steps
- Improved Temporary Target Selection: Better default value auto-selection
- Fixed a Problem with the Rectangular Watch Complication
- Fixed the Colors of the Complications
- Fresh compile for iOS 17 and WatchOS 10
- Much better up to date widgets and complications on iOS and watchOS
- Complications Updates are still not working perfectly. Still working on this...
V3.8.1:
- Fixed an issue with mmol delta-Values
- Fixed an issue where under certain circumstances the bg values couldn't be rendered
V3.8.0:
- Temporary Targets can now be set for up to 12 hours
- Rewritten and new WatchOS Complications
V3.7.3:
- Lockscreen widgets with localized time now
- Fixed an issue with Digital Crown scrolling which has been introduced by watchOS 9
- Improved chart visualization of carbs and insulin
V3.7.2:
- Support for iOS 16 Lockscreen Widgets
- Optimized Circular Complication that displays the blood glucose even on small watches fine.
- Glucose values every minute should be displayed now - if your Sensor supports this.
V3.7.1:
- Improved visualization of meal and carbs treatments
V3.7.0:
- Introduces Apple HealthKit Support (thanks to Sebastian for this great contribution)
All blood glucose values will be synched to HealthKit (if the feature is activated in your nightguard preferences tab)
V3.6.5:
- Fixed a problem with not working alarms. That happened under certain conditions, e.g. when nightscout returned bg values marked as erroneous.
V3.6.4:
- The last value is displayed is once more preserved.
- Delta values for mmol should be displayed now correctly on th fullscreen and in notifications.
- Improved stability
V3.6.3:
- The Watch Part can now be used even if on WatchOS 7. The Always-On Feature should still be available if your watch is on WatchOS 8.
- Suppressed an error message if no data was available at all.
- mmol delta values should be display now fine.
- Removed the short color flickering before displaying the delta value.
V3.6.2:
- Fixed a problem with the new api v2 properties endoint that could occur if you didn't have iob and cob configured on your nightscout backend.
V3.6.1:
- Switched from the old Pebble-API to the newer API V2 Properties Endpoint:
This should fix the old nightscout bug that delta values are wrong if using mmol.
V3.6.0:
- Support for iOS 15 and WatchOS 8
- Always-On support for the nightguard watch part
- New Duration-Tab to keep track and define your Sensor, Cannula and Battery Change Dates
- Fixes a problem where the initial units on the watch are displayed in mmol, although mgdl has been requested
- Fixes a problem with watchOS 8 where mmol values in a complication have been truncated
- Thanks Markus for the Finnish translation!
V3.5.0:
- Custom Alarm Sounds can be uploaded from icloud now - at least if you are using iOS 14.
V3.4.0:
- Improved rendering of bolus treatments
- removed flickering of the time/battery display
- Fixed a problem when entering a new nightscout URI
- Fixed a problem where no bolus treatments could be visualized
V3.3.0:
- Displays Correction Bolus as triangles in the chart now
- Displays Meal-Bolus Carbs and Insulin in the chart now
- Mmol Temporary Targets from AAPS should be correctly converted now
version 3.9.0
posted on 2023-12-21
Dec 21, 2023
Version 3.9.0
V3.9.0:
- Xmas update with the longest requested feature: Much better background notifications.
- And not only notifications: Critical Notifications are send now. You can disable this in your notification settings.
- Allowed alarm targets in 5 instead of 10mgdl steps
- Improved Temporary Target Selection: Better default value auto-selection
- Fixed a Problem with the Rectangular Watch Complication
- Fixed the Colors of the Complications
- Fresh compile for iOS 17 and WatchOS 10
- Much better up to date widgets and complications on iOS and watchOS
- Complications Updates are still not working perfectly. Still working on this...
V3.8.1:
- Fixed an issue with mmol delta-Values
- Fixed an issue where under certain circumstances the bg values couldn't be rendered
V3.8.0:
- Temporary Targets can now be set for up to 12 hours
- Rewritten and new WatchOS Complications
V3.7.3:
- Lockscreen widgets with localized time now
- Fixed an issue with Digital Crown scrolling which has been introduced by watchOS 9
- Improved chart visualization of carbs and insulin
V3.7.2:
- Support for iOS 16 Lockscreen Widgets
- Optimized Circular Complication that displays the blood glucose even on small watches fine.
- Glucose values every minute should be displayed now - if your Sensor supports this.
V3.7.1:
- Improved visualization of meal and carbs treatments
V3.7.0:
- Introduces Apple HealthKit Support (thanks to Sebastian for this great contribution)
All blood glucose values will be synched to HealthKit (if the feature is activated in your nightguard preferences tab)
V3.6.5:
- Fixed a problem with not working alarms. That happened under certain conditions, e.g. when nightscout returned bg values marked as erroneous.
V3.6.4:
- The last value is displayed is once more preserved.
- Delta values for mmol should be displayed now correctly on th fullscreen and in notifications.
- Improved stability
V3.6.3:
- The Watch Part can now be used even if on WatchOS 7. The Always-On Feature should still be available if your watch is on WatchOS 8.
- Suppressed an error message if no data was available at all.
- mmol delta values should be display now fine.
- Removed the short color flickering before displaying the delta value.
V3.6.2:
- Fixed a problem with the new api v2 properties endoint that could occur if you didn't have iob and cob configured on your nightscout backend.
V3.6.1:
- Switched from the old Pebble-API to the newer API V2 Properties Endpoint:
This should fix the old nightscout bug that delta values are wrong if using mmol.
V3.6.0:
- Support for iOS 15 and WatchOS 8
- Always-On support for the nightguard watch part
- New Duration-Tab to keep track and define your Sensor, Cannula and Battery Change Dates
- Fixes a problem where the initial units on the watch are displayed in mmol, although mgdl has been requested
- Fixes a problem with watchOS 8 where mmol values in a complication have been truncated
- Thanks Markus for the Finnish translation!
V3.5.0:
- Custom Alarm Sounds can be uploaded from icloud now - at least if you are using iOS 14.
V3.4.0:
- Improved rendering of bolus treatments
- removed flickering of the time/battery display
- Fixed a problem when entering a new nightscout URI
- Fixed a problem where no bolus treatments could be visualized
V3.3.0:
- Displays Correction Bolus as triangles in the chart now
- Displays Meal-Bolus Carbs and Insulin in the chart now
- Mmol Temporary Targets from AAPS should be correctly converted now
V3.2.3:
- Removed a flickering of reservoir and temporary basal values when updating
- improved notifications if you are using an Apple Watch
- no more Taptic Engine alarms on the watch if the app is in background
- Fixed layout if running the app on an M1 Mac
version 3.8.1
posted on 2023-08-30
Aug 30, 2023
Version 3.8.1
V3.8.1:
- Fixed an issue with mmol delta-Values
- Fixed an issue where under certain circumstances the bg values couldn't be rendered
V3.8.0:
- Temporary Targets can now be set for up to 12 hours
- Rewritten and new WatchOS Complications
V3.7.3:
- Lockscreen widgets with localized time now
- Fixed an issue with Digital Crown scrolling which has been introduced by watchOS 9
- Improved chart visualization of carbs and insulin
V3.7.2:
- Support for iOS 16 Lockscreen Widgets
- Optimized Circular Complication that displays the blood glucose even on small watches fine.
- Glucose values every minute should be displayed now - if your Sensor supports this.
V3.7.1:
- Improved visualization of meal and carbs treatments
V3.7.0:
- Introduces Apple HealthKit Support (thanks to Sebastian for this great contribution)
All blood glucose values will be synched to HealthKit (if the feature is activated in your nightguard preferences tab)
V3.6.5:
- Fixed a problem with not working alarms. That happened under certain conditions, e.g. when nightscout returned bg values marked as erroneous.
V3.6.4:
- The last value is displayed is once more preserved.
- Delta values for mmol should be displayed now correctly on th fullscreen and in notifications.
- Improved stability
V3.6.3:
- The Watch Part can now be used even if on WatchOS 7. The Always-On Feature should still be available if your watch is on WatchOS 8.
- Suppressed an error message if no data was available at all.
- mmol delta values should be display now fine.
- Removed the short color flickering before displaying the delta value.
V3.6.2:
- Fixed a problem with the new api v2 properties endoint that could occur if you didn't have iob and cob configured on your nightscout backend.
V3.6.1:
- Switched from the old Pebble-API to the newer API V2 Properties Endpoint:
This should fix the old nightscout bug that delta values are wrong if using mmol.
V3.6.0:
- Support for iOS 15 and WatchOS 8
- Always-On support for the nightguard watch part
- New Duration-Tab to keep track and define your Sensor, Cannula and Battery Change Dates
- Fixes a problem where the initial units on the watch are displayed in mmol, although mgdl has been requested
- Fixes a problem with watchOS 8 where mmol values in a complication have been truncated
- Thanks Markus for the Finnish translation!
V3.5.0:
- Custom Alarm Sounds can be uploaded from icloud now - at least if you are using iOS 14.
V3.4.0:
- Improved rendering of bolus treatments
- removed flickering of the time/battery display
- Fixed a problem when entering a new nightscout URI
- Fixed a problem where no bolus treatments could be visualized
V3.3.0:
- Displays Correction Bolus as triangles in the chart now
- Displays Meal-Bolus Carbs and Insulin in the chart now
- Mmol Temporary Targets from AAPS should be correctly converted now
V3.2.3:
- Removed a flickering of reservoir and temporary basal values when updating
- improved notifications if you are using an Apple Watch
- no more Taptic Engine alarms on the watch if the app is in background
- Fixed layout if running the app on an M1 Mac
version 3.8.0
posted on 2023-07-04
Jul 4, 2023
Version 3.8.0
V3.8.0:
- Temporary Targets can now be set for up to 12 hours
- Rewritten and new WatchOS Complications
V3.7.3:
- Lockscreen widgets with localized time now
- Fixed an issue with Digital Crown scrolling which has been introduced by watchOS 9
- Improved chart visualization of carbs and insulin
V3.7.2:
- Support for iOS 16 Lockscreen Widgets
- Optimized Circular Complication that displays the blood glucose even on small watches fine.
- Glucose values every minute should be displayed now - if your Sensor supports this.
V3.7.1:
- Improved visualization of meal and carbs treatments
V3.7.0:
- Introduces Apple HealthKit Support (thanks to Sebastian for this great contribution)
All blood glucose values will be synched to HealthKit (if the feature is activated in your nightguard preferences tab)
V3.6.5:
- Fixed a problem with not working alarms. That happened under certain conditions, e.g. when nightscout returned bg values marked as erroneous.
V3.6.4:
- The last value is displayed is once more preserved.
- Delta values for mmol should be displayed now correctly on th fullscreen and in notifications.
- Improved stability
V3.6.3:
- The Watch Part can now be used even if on WatchOS 7. The Always-On Feature should still be available if your watch is on WatchOS 8.
- Suppressed an error message if no data was available at all.
- mmol delta values should be display now fine.
- Removed the short color flickering before displaying the delta value.
V3.6.2:
- Fixed a problem with the new api v2 properties endoint that could occur if you didn't have iob and cob configured on your nightscout backend.
V3.6.1:
- Switched from the old Pebble-API to the newer API V2 Properties Endpoint:
This should fix the old nightscout bug that delta values are wrong if using mmol.
V3.6.0:
- Support for iOS 15 and WatchOS 8
- Always-On support for the nightguard watch part
- New Duration-Tab to keep track and define your Sensor, Cannula and Battery Change Dates
- Fixes a problem where the initial units on the watch are displayed in mmol, although mgdl has been requested
- Fixes a problem with watchOS 8 where mmol values in a complication have been truncated
- Thanks Markus for the Finnish translation!
V3.5.0:
- Custom Alarm Sounds can be uploaded from icloud now - at least if you are using iOS 14.
V3.4.0:
- Improved rendering of bolus treatments
- removed flickering of the time/battery display
- Fixed a problem when entering a new nightscout URI
- Fixed a problem where no bolus treatments could be visualized
V3.3.0:
- Displays Correction Bolus as triangles in the chart now
- Displays Meal-Bolus Carbs and Insulin in the chart now
- Mmol Temporary Targets from AAPS should be correctly converted now
V3.2.3:
- Removed a flickering of reservoir and temporary basal values when updating
- improved notifications if you are using an Apple Watch
- no more Taptic Engine alarms on the watch if the app is in background
- Fixed layout if running the app on an M1 Mac
V3.2.2:
- colored uploader battery on the phone app
- colored care data and uploader battery on the watch app
- better error message if you secured your backend and forget to enter your security token in nightguard.
- Introducing user defined default temporary targets. They can be changed by the user and will be synced to the watch.
The last entered temporary target is automatically stored as the new default. And that is done for every temporary target reason.
- finer grained carbs entry
- More Finnish translations (thanks Markus!)
version 3.7.3
posted on 2022-11-06
Nov 6, 2022
Version 3.7.3
V3.7.3:
- Lockscreen widgets with localized time now
- Fixed an issue with Digital Crown scrolling which has been introduced by watchOS 9
- Improved chart visualization of carbs and insulin
V3.7.2:
- Support for iOS 16 Lockscreen Widgets
- Optimized Circular Complication that displays the blood glucose even on small watches fine.
- Glucose values every minute should be displayed now - if your Sensor supports this.
V3.7.1:
- Improved visualization of meal and carbs treatments
V3.7.0:
- Introduces Apple HealthKit Support (thanks to Sebastian for this great contribution)
All blood glucose values will be synched to HealthKit (if the feature is activated in your nightguard preferences tab)
V3.6.5:
- Fixed a problem with not working alarms. That happened under certain conditions, e.g. when nightscout returned bg values marked as erroneous.
V3.6.4:
- The last value is displayed is once more preserved.
- Delta values for mmol should be displayed now correctly on th fullscreen and in notifications.
- Improved stability
V3.6.3:
- The Watch Part can now be used even if on WatchOS 7. The Always-On Feature should still be available if your watch is on WatchOS 8.
- Suppressed an error message if no data was available at all.
- mmol delta values should be display now fine.
- Removed the short color flickering before displaying the delta value.
V3.6.2:
- Fixed a problem with the new api v2 properties endoint that could occur if you didn't have iob and cob configured on your nightscout backend.
V3.6.1:
- Switched from the old Pebble-API to the newer API V2 Properties Endpoint:
This should fix the old nightscout bug that delta values are wrong if using mmol.
V3.6.0:
- Support for iOS 15 and WatchOS 8
- Always-On support for the nightguard watch part
- New Duration-Tab to keep track and define your Sensor, Cannula and Battery Change Dates
- Fixes a problem where the initial units on the watch are displayed in mmol, although mgdl has been requested
- Fixes a problem with watchOS 8 where mmol values in a complication have been truncated
- Thanks Markus for the Finnish translation!
V3.5.0:
- Custom Alarm Sounds can be uploaded from icloud now - at least if you are using iOS 14.
V3.4.0:
- Improved rendering of bolus treatments
- removed flickering of the time/battery display
- Fixed a problem when entering a new nightscout URI
- Fixed a problem where no bolus treatments could be visualized
V3.3.0:
- Displays Correction Bolus as triangles in the chart now
- Displays Meal-Bolus Carbs and Insulin in the chart now
- Mmol Temporary Targets from AAPS should be correctly converted now
V3.2.3:
- Removed a flickering of reservoir and temporary basal values when updating
- improved notifications if you are using an Apple Watch
- no more Taptic Engine alarms on the watch if the app is in background
- Fixed layout if running the app on an M1 Mac
V3.2.2:
- colored uploader battery on the phone app
- colored care data and uploader battery on the watch app
- better error message if you secured your backend and forget to enter your security token in nightguard.
- Introducing user defined default temporary targets. They can be changed by the user and will be synced to the watch.
The last entered temporary target is automatically stored as the new default. And that is done for every temporary target reason.
- finer grained carbs entry
- More Finnish translations (thanks Markus!)
version 3.7.1
posted on 2022-05-31
May 31, 2022 Version 3.7.1
V3.7.1:
- Improved visualization of meal and carbs treatments
V3.7.0:
- Introduces Apple HealthKit Support (thanks to Sebastian for this great contribution)
All blood glucose values will be synched to HealthKit (if the feature is activated in your nightguard preferences tab)
V3.6.5:
- Fixed a problem with not working alarms. That happened under certain conditions, e.g. when nightscout returned bg values marked as erroneous.
V3.6.4:
- The last value is displayed is once more preserved.
- Delta values for mmol should be displayed now correctly on th fullscreen and in notifications.
- Improved stability
V3.6.3:
- The Watch Part can now be used even if on WatchOS 7. The Always-On Feature should still be available if your watch is on WatchOS 8.
- Suppressed an error message if no data was available at all.
- mmol delta values should be display now fine.
- Removed the short color flickering before displaying the delta value.
V3.6.2:
- Fixed a problem with the new api v2 properties endoint that could occur if you didn't have iob and cob configured on your nightscout backend.
V3.6.1:
- Switched from the old Pebble-API to the newer API V2 Properties Endpoint:
This should fix the old nightscout bug that delta values are wrong if using mmol.
V3.6.0:
- Support for iOS 15 and WatchOS 8
- Always-On support for the nightguard watch part
- New Duration-Tab to keep track and define your Sensor, Cannula and Battery Change Dates
- Fixes a problem where the initial units on the watch are displayed in mmol, although mgdl has been requested
- Fixes a problem with watchOS 8 where mmol values in a complication have been truncated
- Thanks Markus for the Finnish translation!
V3.5.0:
- Custom Alarm Sounds can be uploaded from icloud now - at least if you are using iOS 14.
V3.4.0:
- Improved rendering of bolus treatments
- removed flickering of the time/battery display
- Fixed a problem when entering a new nightscout URI
- Fixed a problem where no bolus treatments could be visualized
V3.3.0:
- Displays Correction Bolus as triangles in the chart now
- Displays Meal-Bolus Carbs and Insulin in the chart now
- Mmol Temporary Targets from AAPS should be correctly converted now
V3.2.3:
- Removed a flickering of reservoir and temporary basal values when updating
- improved notifications if you are using an Apple Watch
- no more Taptic Engine alarms on the watch if the app is in background
- Fixed layout if running the app on an M1 Mac
V3.2.2:
- colored uploader battery on the phone app
- colored care data and uploader battery on the watch app
- better error message if you secured your backend and forget to enter your security token in nightguard.
- Introducing user defined default temporary targets. They can be changed by the user and will be synced to the watch.
The last entered temporary target is automatically stored as the new default. And that is done for every temporary target reason.
- finer grained carbs entry
- More Finnish translations (thanks Markus!)
V3.2.1:
- Switched back to the v1 api. Quit a lot people are still on very old nightscout version
=> Graphs should be visible now again for these old nightscout backends
=> But don't forget to update your backend!
- Reservoir Units can be displayed now - even if they have decimals
- Increased and finer ranges for carbs and temporary targets
V3.2.0:
- Care- and Loop-Data can be hidden now
- Care-Tab remembers the last selected Temporary Target now.
- Rewritten WatchOS App in SwiftUI
- Temporary Targets can be set on the Watch now.
- Carbs can be added on the app and on the watch.
- Added the visualization of measured blood glucose values as red dots in the chart.
- Removed the RAW Feature for Dexcom G4/G5 Sensors
- Possibility to enter the baseURL on the watch by using speech or scribble.
version 3.7.0
posted on 2022-04-09
Apr 9, 2022 Version 3.7.0
V3.7.0:
- Introduces Apple HealthKit Support (thanks to Sebastian for this great contribution)
All blood glucose values will be synched to HealthKit (if the feature is activated in your nightguard preferences tab)
V3.6.5:
- Fixed a problem with not working alarms. That happened under certain conditions, e.g. when nightscout returned bg values marked as erroneous.
V3.6.4:
- The last value is displayed is once more preserved.
- Delta values for mmol should be displayed now correctly on th fullscreen and in notifications.
- Improved stability
V3.6.3:
- The Watch Part can now be used even if on WatchOS 7. The Always-On Feature should still be available if your watch is on WatchOS 8.
- Suppressed an error message if no data was available at all.
- mmol delta values should be display now fine.
- Removed the short color flickering before displaying the delta value.
V3.6.2:
- Fixed a problem with the new api v2 properties endoint that could occur if you didn't have iob and cob configured on your nightscout backend.
V3.6.1:
- Switched from the old Pebble-API to the newer API V2 Properties Endpoint:
This should fix the old nightscout bug that delta values are wrong if using mmol.
V3.6.0:
- Support for iOS 15 and WatchOS 8
- Always-On support for the nightguard watch part
- New Duration-Tab to keep track and define your Sensor, Cannula and Battery Change Dates
- Fixes a problem where the initial units on the watch are displayed in mmol, although mgdl has been requested
- Fixes a problem with watchOS 8 where mmol values in a complication have been truncated
- Thanks Markus for the Finnish translation!
V3.5.0:
- Custom Alarm Sounds can be uploaded from icloud now - at least if you are using iOS 14.
V3.4.0:
- Improved rendering of bolus treatments
- removed flickering of the time/battery display
- Fixed a problem when entering a new nightscout URI
- Fixed a problem where no bolus treatments could be visualized
V3.3.0:
- Displays Correction Bolus as triangles in the chart now
- Displays Meal-Bolus Carbs and Insulin in the chart now
- Mmol Temporary Targets from AAPS should be correctly converted now
V3.2.3:
- Removed a flickering of reservoir and temporary basal values when updating
- improved notifications if you are using an Apple Watch
- no more Taptic Engine alarms on the watch if the app is in background
- Fixed layout if running the app on an M1 Mac
V3.2.2:
- colored uploader battery on the phone app
- colored care data and uploader battery on the watch app
- better error message if you secured your backend and forget to enter your security token in nightguard.
- Introducing user defined default temporary targets. They can be changed by the user and will be synced to the watch.
The last entered temporary target is automatically stored as the new default. And that is done for every temporary target reason.
- finer grained carbs entry
- More Finnish translations (thanks Markus!)
V3.2.1:
- Switched back to the v1 api. Quit a lot people are still on very old nightscout version
=> Graphs should be visible now again for these old nightscout backends
=> But don't forget to update your backend!
- Reservoir Units can be displayed now - even if they have decimals
- Increased and finer ranges for carbs and temporary targets
V3.2.0:
- Care- and Loop-Data can be hidden now
- Care-Tab remembers the last selected Temporary Target now.
- Rewritten WatchOS App in SwiftUI
- Temporary Targets can be set on the Watch now.
- Carbs can be added on the app and on the watch.
- Added the visualization of measured blood glucose values as red dots in the chart.
- Removed the RAW Feature for Dexcom G4/G5 Sensors
- Possibility to enter the baseURL on the watch by using speech or scribble.
V3.1.3:
- Small visualization fix of persistent high values in mmol.
- Workaround the nightscout bug, that bgdelta is returned as mmol instead of mgdl
version 3.6.5
posted on 2022-01-31
Jan 31, 2022 Version 3.6.5
THIS UPDATE NEEDS WATCHOS8. DON'T UPDATE IF YOUR WATCH DOESN'T SUPPORT IT ANYMORE!!
V3.6.5:
- Fixed a problem with not working alarms. That happened under certain conditions, e.g. when nightscout returned bg values marked as erroneous.
V3.6.4:
- The last value is displayed is once more preserved.
- Delta values for mmol should be displayed now correctly on th fullscreen and in notifications.
- Improved stability
V3.6.3:
- The Watch Part can now be used even if on WatchOS 7. The Always-On Feature should still be available if your watch is on WatchOS 8.
- Suppressed an error message if no data was available at all.
- mmol delta values should be display now fine.
- Removed the short color flickering before displaying the delta value.
V3.6.2:
- Fixed a problem with the new api v2 properties endoint that could occur if you didn't have iob and cob configured on your nightscout backend.
V3.6.1:
- Switched from the old Pebble-API to the newer API V2 Properties Endpoint:
This should fix the old nightscout bug that delta values are wrong if using mmol.
V3.6.0:
- Support for iOS 15 and WatchOS 8
- Always-On support for the nightguard watch part
- New Duration-Tab to keep track and define your Sensor, Cannula and Battery Change Dates
- Fixes a problem where the initial units on the watch are displayed in mmol, although mgdl has been requested
- Fixes a problem with watchOS 8 where mmol values in a complication have been truncated
- Thanks Markus for the Finnish translation!
V3.5.0:
- Custom Alarm Sounds can be uploaded from icloud now - at least if you are using iOS 14.
V3.4.0:
- Improved rendering of bolus treatments
- removed flickering of the time/battery display
- Fixed a problem when entering a new nightscout URI
- Fixed a problem where no bolus treatments could be visualized
V3.3.0:
- Displays Correction Bolus as triangles in the chart now
- Displays Meal-Bolus Carbs and Insulin in the chart now
- Mmol Temporary Targets from AAPS should be correctly converted now
V3.2.3:
- Removed a flickering of reservoir and temporary basal values when updating
- improved notifications if you are using an Apple Watch
- no more Taptic Engine alarms on the watch if the app is in background
- Fixed layout if running the app on an M1 Mac
V3.2.2:
- colored uploader battery on the phone app
- colored care data and uploader battery on the watch app
- better error message if you secured your backend and forget to enter your security token in nightguard.
- Introducing user defined default temporary targets. They can be changed by the user and will be synced to the watch.
The last entered temporary target is automatically stored as the new default. And that is done for every temporary target reason.
- finer grained carbs entry
- More Finnish translations (thanks Markus!)
V3.2.1:
- Switched back to the v1 api. Quit a lot people are still on very old nightscout version
=> Graphs should be visible now again for these old nightscout backends
=> But don't forget to update your backend!
- Reservoir Units can be displayed now - even if they have decimals
- Increased and finer ranges for carbs and temporary targets
V3.2.0:
- Care- and Loop-Data can be hidden now
- Care-Tab remembers the last selected Temporary Target now.
- Rewritten WatchOS App in SwiftUI
- Temporary Targets can be set on the Watch now.
- Carbs can be added on the app and on the watch.
- Added the visualization of measured blood glucose values as red dots in the chart.
- Removed the RAW Feature for Dexcom G4/G5 Sensors
- Possibility to enter the baseURL on the watch by using speech or scribble.
V3.1.3:
- Small visualization fix of persistent high values in mmol.
- Workaround the nightscout bug, that bgdelta is returned as mmol instead of mgdl
V3.1.2:
- Fixes a problem with always playing "high bg" alarms if using mmol.
- Optimized layout on the apple watch
version 3.6.4
posted on 2021-11-10
Nov 10, 2021 Version 3.6.4
THIS UPDATE NEEDS WATCHOS8. DON'T UPDATE IF YOUR WATCH DOESN'T SUPPORT IT ANYMORE!!
V3.6.4:
- The last value is displayed is once more preserved.
- Delta values for mmol should be displayed now correctly on th fullscreen and in notifications.
- Improved stability
V3.6.3:
- The Watch Part can now be used even if on WatchOS 7. The Always-On Feature should still be available if your watch is on WatchOS 8.
- Suppressed an error message if no data was available at all.
- mmol delta values should be display now fine.
- Removed the short color flickering before displaying the delta value.
V3.6.2:
- Fixed a problem with the new api v2 properties endoint that could occur if you didn't have iob and cob configured on your nightscout backend.
V3.6.1:
- Switched from the old Pebble-API to the newer API V2 Properties Endpoint:
This should fix the old nightscout bug that delta values are wrong if using mmol.
V3.6.0:
- Support for iOS 15 and WatchOS 8
- Always-On support for the nightguard watch part
- New Duration-Tab to keep track and define your Sensor, Cannula and Battery Change Dates
- Fixes a problem where the initial units on the watch are displayed in mmol, although mgdl has been requested
- Fixes a problem with watchOS 8 where mmol values in a complication have been truncated
- Thanks Markus for the Finnish translation!
V3.5.0:
- Custom Alarm Sounds can be uploaded from icloud now - at least if you are using iOS 14.
V3.4.0:
- Improved rendering of bolus treatments
- removed flickering of the time/battery display
- Fixed a problem when entering a new nightscout URI
- Fixed a problem where no bolus treatments could be visualized
V3.3.0:
- Displays Correction Bolus as triangles in the chart now
- Displays Meal-Bolus Carbs and Insulin in the chart now
- Mmol Temporary Targets from AAPS should be correctly converted now
V3.2.3:
- Removed a flickering of reservoir and temporary basal values when updating
- improved notifications if you are using an Apple Watch
- no more Taptic Engine alarms on the watch if the app is in background
- Fixed layout if running the app on an M1 Mac
V3.2.2:
- colored uploader battery on the phone app
- colored care data and uploader battery on the watch app
- better error message if you secured your backend and forget to enter your security token in nightguard.
- Introducing user defined default temporary targets. They can be changed by the user and will be synced to the watch.
The last entered temporary target is automatically stored as the new default. And that is done for every temporary target reason.
- finer grained carbs entry
- More Finnish translations (thanks Markus!)
V3.2.1:
- Switched back to the v1 api. Quit a lot people are still on very old nightscout version
=> Graphs should be visible now again for these old nightscout backends
=> But don't forget to update your backend!
- Reservoir Units can be displayed now - even if they have decimals
- Increased and finer ranges for carbs and temporary targets
V3.2.0:
- Care- and Loop-Data can be hidden now
- Care-Tab remembers the last selected Temporary Target now.
- Rewritten WatchOS App in SwiftUI
- Temporary Targets can be set on the Watch now.
- Carbs can be added on the app and on the watch.
- Added the visualization of measured blood glucose values as red dots in the chart.
- Removed the RAW Feature for Dexcom G4/G5 Sensors
- Possibility to enter the baseURL on the watch by using speech or scribble.
V3.1.3:
- Small visualization fix of persistent high values in mmol.
- Workaround the nightscout bug, that bgdelta is returned as mmol instead of mgdl
V3.1.2:
- Fixes a problem with always playing "high bg" alarms if using mmol.
- Optimized layout on the apple watch
V3.1.1:
- As promised: Know the very first Apple Watch Series 0 should really work (for a last time) with V3.1.1
Special release for francy ;-) .